What you don’t want to deal with on a hot summer day is an AC that cannot cool your house. AC units are complicated systems that require a perfect combination of pressure, temperature, and airflow to function correctly. As such, several components in your air conditioner can fail along the way and result in its failure to perform adequately. You can read through some of the common causes of an AC that doesn’t cool your home.

Clogged Air Filter

The air filter must be clogged if your AC unit is not cooling. As such, the air is unable to flow through the air filter properly. Consequently, it reduces the capacity of the AC unit to cool. You may have to replace the air filters or hire an expert to clean them.

The Condenser Outside

The condenser is an integral part of an air conditioner. However, most homeowners overlook it because it is located outside the house. Sometimes grass grows tall on it and debris fall and accumulate on it, which blocks the flow of air from the bottom. You should hire an air conditioning repair in Yankton to inspect and repair the condenser for it to run smoothly.

Improper Insulation

Usually, some rooms in your home are hotter than others. You can start with the ductwork and check if they have insulation. Naked ducts are a leading cause of AC units that don’t cool. You might have to call an air conditioning repair in Yankton right away for insulation recommendations to enhance the cooling capability of the unit.

Faulty Compressor

A compressor is responsible for the cooling effects of an air conditioner. The compressor is defective if your unit is not cooling. If the compressor is defective, the cooling cycle doesn’t start, and your AC fails to cool.

It is frustrating when your AC fails to cool your house. Therefore, the solution should be to hire a professional to inspect and repair any faulty component. You need the services of a qualified air conditioning repair to save your system. Contact our experienced expert.

Visit Larry Heating and Cooling for more information.